Install The Fp-2; Install The - Oracle Fabric Interconnect Series User Manual

Install the FP-2

2. Insert and tighten the screws to attach the new mounting brackets to the
chassis.
3. Continue the procedure by inserting the new front panel.
See "Install the FP-2" on page
Install the FP-2
To install the new front panel (FP-2), the old front panel must already be removed, and the new
Before You Begin
mounting brackets must already be installed.
1. Align the FP-2 with the guides on the inside of the chassis.
Make sure that the ejector levers are fully extended so that they are pointing towards you.
Gently slide the FP-2 into the chassis, making sure to apply even pressure so
2.
that the FP-2 does not twist or rotate while you are inserting it.
164 Oracle Fabric Interconnect Hardware User's Guide • July 2016
164.