Table of Contents
Advertisement
Understanding Chassis Components and Indicators
Eject
Blinking green
Off
Off
Off
Solid blue
Blinking blue
Fibre Channel I/O Module LED Codes
The Fabric Interconnect supports the 2x8 Line-Rate FC Module which provides 2 ports.
Note -
install this module in a Fabric Interconnect running an SDR InfiniBand fabric.
Figure 41, "LED Codes — Fibre Channel Module," on page 68
O module LED codes.
FIGURE 41
These are general LED codes for the entire module:
Eject
Blinking green
Off
Off
Off
Solid blue
Blinking blue
These are specific LED codes for each Fibre Channel:
68
Oracle Fabric Interconnect Hardware User's Guide • July 2016
Status
Blinking green
Blinking green
Solid green
Solid amber
Solid green
Solid green
The 2x8 FC Module is supported on InfiniBand DDR Fabric Interconnects only. Do not
LED Codes — Fibre Channel Module
Status
Blinking green
Blinking green
Solid green
Solid amber
Solid green
Solid green
Description
I/O card is running diagnostics
I/O card is booting
I/O card is up/running
Fault detected
I/O card is down (power to card is off)
I/O card is shutting down
shows the Fibre Channel I/
Description
I/O card is running diagnostics
I/O card is booting
I/O card is up/running
Fault detected
I/O card is down (power to card is off)
I/O card is shutting down
Advertisement
Table of Contents
Need help?
Do you have a question about the Fabric Interconnect Series and is the answer not in the manual?
Questions and answers