Table of Contents
Advertisement
Installation Options
Easy 1st Install
Important Note:
If the Talari configuration for the E1000 does not match the installed hardware (for example, if the appliance is an E1000 with No
Expansion Card and an interface between 9 and 12 is configured), the Talari service be disabled when the package is applied,
st
and the appliance will need to be factory defaulted before Easy 1
Install can be attempted again.
Valid ports for each hardware option are
highlighted in green below,
while invalid ports are indicated with a red
symbol:
E1000 with No Expansion Card:
Port 1 Port 2 Port 3 Port 4
Port 5 Port 6 Port 7 Port 8
Port 1: Gigabit Ethernet (Bypass pair with Port 2)
Port 2: Gigabit Ethernet (Bypass pair with Port 1)
Port 3: Gigabit Ethernet (Bypass pair with Port 4)
Port 4: Gigabit Ethernet (Bypass pair with Port 3)
Port 5: Gigabit Ethernet (non-bypass)
Port 6: Gigabit Ethernet (non-bypass)
Port 7: Gigabit Ethernet (non-bypass)
Port 8: Gigabit Ethernet (non-bypass)
Version 1.1
1 5
Advertisement
Table of Contents
