Install Media Modules
Installing an S8300 Media Server Module
The S8300 can only be inserted in slot V1 on the left side of the Avaya G350 Media Gateway.
To install an S8300 Media Server Module:
1. Remove the plate between slots V1 and V2, labeled "Remove before removing or inserting
S8300 module."
2. Remove the blank plate from slot V1.
3. Position the media module squarely before the V1 bay opening and engage both sides of
the module in the interior guides.
4. Slide the S8300 module slowly into the chassis. Maintain an even pressure to ensure that
the module does not become twisted or disengaged from the guides.
Figure 6: Inserting the S8300 media server module.
5. Apply firm pressure to engage the connectors.
6. Tighten the spring-loaded captive screws on the front of the module to lock the S8300
Media Server module into the chassis.
7. Replace the plate labeled "Remove before removing or inserting S8300 module" between
slots V1 and V2. Tighten the screws on the front of the plate.
22 Quick Start for Hardware Installation Avaya G350 Media Gateway