Hyundai HL955 Manual page 612

(9) (9) Quick coupler switch (option) Quick coupler switch
760F3CD86A-1
760F3CD86B-1
760F3CD86C-1
(10) (10) Ride control switch (option) Ride control switch
760F3CD87A-1
760F3CD87B-1
①
Locking attachment Locking attachment
- The quick coupler pins move in the engaged position and buzzer
sounds.
- The green pilot lamp is turned ON.
※
Check for engagement as followings. Check for engagement as followings.
a. Put down pressure on the attachment.
b. Back up the machine and make sure that there is no movement
between the quick coupler and attachment.
②
Unlocking attachment Unlocking attachment
- The quick coupler pins move in the disengaged position and
buzzer sounds.
- The red pilot lamp is turned ON.
Always check that the attachment is properly secured to the Always check that the attachment is properly secured to the
attachment quick coupler by pressing the front part of the attachment quick coupler by pressing the front part of the
attachment against the ground. attachment against the ground.
Never use an attachment before you have checked its Never use an attachment before you have checked its
mounting. mounting.
①
ON, Conditional speed ON, Conditional speed
- Select ON, conditional speed ON, conditional speed in order to turn on the automatic
ride control. The automatic ride control automatically turns on
when the travel speed exceeds a preset speed.
(forward / backward 1~15 km/h )
- The blue pilot lamp is turned ON.
②
ON, Always ON, Always
- Select ON, Always ON, Always in order to turn on the system for ride control
regardless speed. The ride control will smooth the ride of the
machine during travel.
- The green pilot lamp is turned ON.
③
OFF OFF
Select OFF OFF in order to turn off the system for the ride control.
7-61