Hyundai HL955 Manual page 256

Pipe - System pressure to lock-up Pipe - System pressure to lock-up
clutch valve clutch valve
③
Fix pipes (1) with hollow screws (3) and
O-rings and screw nut (2).
Fit O-ring 13×2 on hollow screw (3),
insert into eye of pipes, mount O-ring 18
×2.5.
·Tightening torque :
4.59 kgf·m (33.2 lbf·ft)
Fixing of screw nut (2).
·Tightening torque :
4.59 kgf·m (33.2 lbf·ft)
Pipes - System pressure from lock-up Pipes - System pressure from lock-up
clutch valve to lock-up clutch clutch valve to lock-up clutch
④
Fix screw-in sleeve (1).
·Tightening torque :
4.59 kgf·m (33.2 lbf·ft)
Adjusting screws
※
Wet screw-in thread with loctite (type No.
243).
Fix pipes (2) with screw nut (3 and 4).
·Tightening torque (screw nut 3) :
3.57 kgf·m (25.8 lbf·ft)
·Tightening torque (screw nut 4) :
4.59 kgf·m (33.2 lbf·ft)
(3) (3) Fitting of fine filter (pressure filter) Fitting of fine filter (pressure filter)
①
Fix filter head (1) with new O-rings
34.2×3 to the housing rear part by
means of Torx screws (2).
·Tightening torque (M8/10.9×60) :
3.47 kgf·m (25.1 lbf·ft)
Socket wrench TX-40
3
5870 204 036
1
5870 042 004
3-200
2
3
2
1
7609ATM398
4
1
2
7609ATM399
7609ATM400