Hyundai HL955 Manual page 591

②
Kick down mode
760F3CD29A
Kick down switch
Joystick steering
FNR RCV
760F3CD29C
③
Clutch cut off (C.C.O) mode
760F3CD26A
· Four modes are available for operator's preference and job condition.
- OFF : The clutch cut off function is disable.
- L (Low) : The clutch is disengaged early for short-distance and rapid loading.
- M (Medium) : The clutch is disengaged normally for general digging and loading operation.
- H (High) : The clutch cut off function is automatically adjusted depending on slope angle
or machine load, And inching fuction becomes possible by using the brake
pedal.
·
The clutch cut off functions of the left brake pedal depend on the position of the left brake pedal
and the setting of the clutch cut off mode.
Clutch cut off mode
Left brake pedal
·
Manual mode (shift mode : manual)
It is effective 2nd speed to 1st speed only and recover to 2nd speed
quickly when push the switch one more time.
·
Automatic mode (shift mode : AL, AN, AH)
Mode 1 (down/up)
-
It shifts down quickly from current gear to one step lower speed by
pushing the switch and recover to current speed quickly when push
the switch one more time.
Mode 2 (down only)
-
It shifts down from current gear to one step lower speed when
push the switch every time.
The kick down function is released in only 1st speed.
※
The normal autoshift function continues after the kick down
switch is released.
Positions for clutch cut off function
L
L, M
7-40
760F3CD29B
760F3CD26B
Left brake pedal
M
M
M mode
L mode
H mode
760F3CD27
H
H