⑤
Press in preassembled idler gear (1)
onto the shaft until contact is obtained.
⑥
Place both O-rings (1 and 2) into the
piston grooves and oil them.
1
75 × 3
2
142 × 3
※
Check function of the drain valve (see
arrow) - There must be no jamming of
the ball.
⑦
Place piston (1) into the disk carrier.
※
Observe installation position, see figure.
⑧
Use a hand-operated press to place
piston into the disk carrier by means of
the assembly aid.
Assembly aid
5870 345 088
3-134
1
7609ATM155
1
2
7609ATM156
1
7609ATM157
7609ATM158