Hyundai HL955 Manual page 189

8) 8) REASSEMBLY REASSEMBLY
Clutches KV / KR / K1 / K2 / K3 / K4 Clutches KV / KR / K1 / K2 / K3 / K4
input and output shaft input and output shaft
(1) (1) KV Clutch KV Clutch
①
Heat up bearing inner ring (approx.
120˚C)
②
Mount bearing inner ring (1) until contact
is obtained.
Fit rectangular ring 40 × 2.5 (2).
※
Wear protective gloves.
※
Adjust bearing inner ring after cooling-
down.
③
Mount needle cage 60×68×20 (1) onto
the shaft and oil it.
④
Install ball bearing 50 × 90 × 18 (2) into
the idler gear (1) until contact is obtained
and fix it by means of retaining ring
90 × 3 (3).
2
3
1
3-133
7609ATM151
1
7609ATM152
1
7609ATM153
2
7609ATM154