Hyundai HL955 Manual page 197

⑧
Use a hand-operated press to place
piston into the disk carrier by means of
the assembly aid.
Assembly aid
⑨
Mount inner installer (S) onto the disk
carrier.
Install disk (1), compression spring (2),
support shim (3) and L-ring (4).
※
Installation position support shim and
L-ring see figure TM185.
Inner installer : see figure TM184
⑩
Preload compression spring by means of
assembly aid (S1) and pressure piece
(S2), until L-ring has engaged into the
annular groove.
Assembly aid (S1)
Assembly fixture (S＋S2) 5870 345 124
(Inner installer and pressure piece)
※
It is always necessary to mount a new
L-ring.
Disk carrier with piston retraction :
1 Washer
2 Compression spring
3 Support shim
4 L-ring
5 Disk carrier
6 Drain valve (piston)
7 Piston with O-rings
5870 345 088
5870 345 088
3-141
4
2
S
S2
1 2
5
6
7
7609ATM182
3
1
7609ATM183
S1
7609ATM184
3
4
7609ATM185