Hyundai HL955 Manual page 164

※
The suction tube (1) and the lubrication
lines (2) are rolled in and are highly
difficult to remove.
In case of damage, use of the appropriate
special tool is imperative for fitting or
replacing these components.
Rolling tool
(9) Remove bearing outer rings (arrows) from
the housing front part.
※
If, contrary to the recommendation, the
tapered roller bearings of clutches, input
and output are not replaced, it is
imperative to ensure the previous pairing
(bearing outer ring/ bearing inner ring).
Bearing outer ring and bearing inner ring
must be marked.
(10) Disengage retaining ring (1) and remove
pump shafts (2).
(11) Press ball bearing (1) off the pump shaft.
Snap out rectangular ring (2).
5870 600 003
3-108
1
1
2
1
2
7609ATM053
7609ATM054
7609ATM055
2
7609ATM056