17
Put on sealing plate (1) and duct plate
(2).
※
Screens (3) to show upwards.
※
It is not permitted to reassemble the seal
plate after opening the threaded joint
shift unit/duct plate.
In case of repair it is always necessary to
mount a new seal plate.
18
Place duct plate (1) and fix it equally by
means of Torx screws (2).
·Tightening torque (M6/10.9×23) :
1.07 kgf·m (7.74 lbf·ft)
Socket wrench TX-27
19
Provide the screw plugs M10×1 with
O-rings 8×1.5 (1) and install them.
·Tightening torque :
0.61 kgf·m (4.43 lbf·ft)
20
Insert converter safety valve (1) into the
housing hole until contact is obtained.
5873 042 002
3-197
2
1
1
1
1
3
7609ATM387
2
7609ATM388
7609ATM389
7609ATM390