Hyundai HL955 Manual page 227

⑧
Mount turbine shaft (1) until the snap ring
engages into the input shaft groove.
※
Turbine shaft is axially fixed.
Snap in and interlock rectangular ring 60
×3 (2).
With lock-up clutch (5-speed T/M) With lock-up clutch (5-speed T/M)
⑨
Mount turbine shaft (1) until the snap ring
engages into the input shaft groove.
Turbine shaft is axially fixed.
Snap in and interlock rectangular ring.
2 60×3
3 36×2.5
(8) (8) Output shaft Output shaft
①
Heat up bearing inner ring (approx.
120˚C)
②
Mount bearing inner ring (1) until contact
is obtained.
※
Wear protective gloves.
※
Adjust bearing inner ring after cooling-
down.
3-171
1
2
7609ATM299
3
1
2
7609ATM300
7609ATM301
1
7609ATM302