Hyundai HL955 Manual page 300

1 Brake housing
2 Guide ring
3 Back-up ring
4 Grooved ring
5 Grooved ring
6 Back-up ring
7 Slide ring seal
8 Output shaft
⑧
Flush-mount the slotted pins (6EA) into
the holes of the piston.
⑨
Insert the piston into the brake housing
and carefully install with the fixing device
until contact is obtained.
Fixing device
※
Sufficiently oil seal surface of piston/
back-up rings, grooved rings and guide
ring.
AA00 680 530
3-244
7609AAX151
7609AAX152
7609AAX153