Hyundai HL955 Manual page 588

(3) (3)
Fault and maintenance warning Fault and maintenance warning
760F3CD14-1
①
If you touch the warning sign (red icon), move to the
quick menu.
②
You can check the fault message and move the mainte-
nance screen by touching relevant area.
(4) (4) Machine monitoring warning Machine monitoring warning
①
Warning sign (red icon) will be shown when the tem-
perature of hydraulic oil, cooling water, transmission oil
or battery voltage is not normal state.
②
Case of warning sign
Icon
Above 106˚C of hydraulic oil temperature
Above 105˚C of cooling water temperature
Above 107˚C of transmission oil temperature
Below 24.5 voltage of battery (for 3 minutes)
(5) (5) Communication error Communication error
①
MCU could not communicate with monitor over 10 sec-
onds, error message will be show on the screen.
(6) (6) Eco gauge Eco gauge
①
This gauge indicates the fuel consumption rate and
machine load status. So that operators can be careful
with fuel economy.
②
The fuel consumption rate or machine load is high, the
segment is increased.
③
The color of Eco gauge indicates operation status.
·White : Idle operation
·Green : Economy operation
·Yellow : Non-economy operation at a medium level.
·Red
: Non-economy operation at a high level.
Description
7-37
760F3CD15-1
ECO gauge
760F3CD16-1
760F3CD17-1
760F3CD18-1
760F3CD19-1
760F3CD113-1