Hyundai HL955 Manual page 296

(7) (7) Reassembly axle housing Reassembly axle housing
①
Grease O-ring (see arrow) and insert it
into the axle housing.
②
Mount two locating pins and bring the
axle housing into contact position with
the axle drive housing by using the lifting
device.
Then fix the axle housing by means of
hexagon screws.
·Tightening torque (M20/10.9) :
57.1 kgf·m (413 lbf·ft)
Locating pins
※
After assembling the axle housing
secure the axle with clamping brackets.
③
Mount fitting.
·Tightening torque :
3.67 kgf·m (26.6 lbf·ft)
④
Grease O-ring and insert it into the
annular groove of the brake tube (see
arrow).
5870 204 024
3-240
7609AAX137
7609AAX138
7609AAX139
7609AAX140