Hyundai HL955 Manual page 519

2. BOOM HEIGHT KICKOUT ADJUSTMENT
The bucket can be adjusted to a height
desired by using the boom kick-out device.
Park the machine on level ground and
bl o ck t h e t i r e s t o p r eve n t s u d d e n
movement of the machine.
Press the parking brake switch.
Fix the front and rear frames by using the
safety lock bar.
D o n o t wo r k u n d e r n e a t h t h e wo r k
equipment.
1) ADJUSTMENT OF THE BOOM KICKOUT AND
BUCKET LEVELER
(1)
Lift kickout position
To set the lift kickout, raise the bucket to the
desired position above the midway point. Then
push icon ( , A) for 2~3 seconds. The boom
will return to the programmed position when the
raise detent is activated and the boom is below
the kickout position.
(2)
Lower kickout position
To set the lower kickout, lower the bucket to the
desired position below the midway point. Then
push icon ( , A) for 2~3 seconds. The boom
will return to the programmed position when the
float detent is activated and the boom is at least
a foot above the kickout position.
(3)
Bucket leveler position
To set the bucket leveler, roll back the bucket to
the desired position. Then push icon (
B) for 2~3 seconds. The bucket will return to the
programmed position when the roll back detent
is activated and the bucket is below the leveler
position.
Detent setting switch
Bucket pivot pin
Midway
point
,
6-54
A
B
Boom pivot pin
Detent position
Neutral
760F4OP28