(3) (3)
Disassembly input
Disassembly input
①
Use the lifting device to lift the differential
out of the axle drive housing.
Load carrying fixture
※
Disassembly of the differential is
described as of page 3-213.
②
Pull the bearing outer ring (see arrow)
out of the housing hole and remove the
shim behind.
③
Press piston (see arrow) out of the axle
housing (see subsequent figure) by
means of compressed air.
※
This operation is only necessary for the
hydraulic lock differential (option).
5870 281 083
3-210
7609AAX029
7609AAX030
7609AAX031
7609AAX032