Hyundai HL955 Manual page 234

(17) Put on screen sheet (1).
Install preassembled output shaft (2).
(18) Oil cylindrical screws (1) and use them to
fix screen sheet .
Tightening torque (M8/8.8×12) :
2.35 kgf·m (17.0 lbf·ft)
※
It is always necessar y to use new
cylindrical screws.
Mount O-rings 22×3 (2) into the annular
groove of the oil tubes and oil them.
Mount all rectangular rings (4), grease and
align them centrally.
Wet mounting face (3) with sealing agent
loctite (type No. 574).
(19) Carefully bring the housing front part into
contact position with the housing rear part
by using the lifting device.
※ Pay attention that both oil tubes are
aligned with the holes in the housing rear
part.
2
4
3-178
1
2
7609ATM324
3
1
7609ATM325
7609ATM326