⑩
Press on end plate with F (approx. 100 N
= 10 kg) and set dial indicator to "zero".
⑪
Then press end plate against the snap
ring (upwards) and read disk clearance.
※
Disk clearance : 1.75~2.05 mm
(see figure TM230)
※
In case of deviations, the disk clearance
must be corrected with an appropriate
snap ring (optional thicknesses = 2.1~
4.2 mm).
⑫
Heat up clutch inner diameter (approx.
120˚C).
⑬
Mount clutch (1) until contact is obtained.
※
Wear protective gloves.
3-154
F
7609ATM232
F
7609ATM233
7609ATM234
1
7609ATM235