Hyundai HL955 Manual page 539

(12) Check :
Check running conditions of the opposite
piston.
7)
ADjUSTMENT OF TAPER ROLLER
BEARING SET
(1)
Cast iron housing must have initial
tension of the bearings: 0~0,05 mm, grind
position A if necessary.
8)
PUMP ASSEMBLY
(1)
Fit the seal into the housing.
Fit the circlip.
(2) Fit the drive with bearing from rear end.
※
Do not touch seal lip with edge of keyway
or spline.
6-74
75796WE90
0~0.05mm
Position A
75796WE91
75796WE92
75796WE93