Hyundai HL955 Manual page 224

1 9 Mount clutch (1) until contact is obtained.
Mount inner disks onto the inner disk
carrier by means of short left/right
rotations.
※
Wear protective gloves.
20 Secure clutch by means of retaining ring
55×2 (1).
Heat up bearing inner ring (approx.
21
120˚C)
Mount bearing inner ring (1) until contact
22
is obtained.
※
Wear protective gloves.
※
Adjust bearing inner ring after cooling-
down.
Fit rectangular ring 40×2.5 (2).
Mount stud bolt (3).
·Tightening torque (M10/8.8×16) :
1.73 kgf·m (12.5 lbf·ft)
L
1
2
3-168
R
7609ATM287
1
7609ATM288
7609ATM289
3
1
7609ATM290