Hyundai HL955 Manual page 283

⑨
Mount two adjusting screws and insert
the housing cover until contact with the
differential housing is obtained.
Locating pins
Preload the differential by means of the
press and bolt with new locking screws.
·Tightening torque (M16/12.9) :
40.8 kgf·m (295 lbf·ft)
⑩
Attach the housing cover and preload the
differential with the press.
Then fix the housing cover with hexagon
screws.
·Tightening torque (M14/10.9) :
18.9 kgf·m (136 lbf·ft)
⑪
Heat both tapered roller bearings and
insert until contact is obtained.
※
Adjust tapered roller bearing after
cooling down.
5870 204 040
3-227
7609AAX094
7609AAX095
7609AAX096