Hyundai HL955 Manual page 386

※
Change the shaft seal and check its
sliding surface (drive shaft) and housing,
grease the sealing ring.
Visual check shaft seal and housing.
(2) Assembling of the sealing ring carefully
down to the stop ring.
(3)
Assemble the retaining ring (circlip).
※
Visual check to ensure that the circlip is
correctly located in the groove.
4) 4) SEALING THE CONTROL VALVE SEALING THE CONTROL VALVE
(1) Remove the control valve.
4-43
73096WE62
Ø25 m
Ø34 mm
7609A4BS28
73096WE61
73096WE64