Hyundai HL955 Manual page 237

③
Mount output flange (1) until contact is
obtained.
④
Insert O-ring 48×4 into the space
between output flange and shaft.
Fix output flange (1) by means of washer
(2) and hexagon screws (3).
Oil hexagon screws before the assembly.
·Tightening torque (M10/8.×30) :
4.69 kgf·m (33.9 lbf·ft)
※
It is always necessary to use new
hexagon screws.
(2) (2) Output flange output side with parking Output flange output side with parking
brake brake
①
Use driver (S) to mount shaft seal
90×120×13, with the sealing lip
showing to the oil sump.
Driver
※
Use of the specified driver (S) ensures
the exact installation position.
※
Fill space between sealing lip and dust
lip with grease.
※
Wet outer diameter (rubber-coated) with
spirit.
※
Installation position shaft seal see figure
TM332.
5870 048 237
3-181
3
2
S
1
7609ATM334
1
7609ATM335
7609ATM336