Hyundai HL955 Manual page 448

(30) Fit the six screws with washers and insert
them. Cross-tighten all the screws and
the rolled pin.
·Tightening torque : 3.1±0.6 kgf·m
(31) Place the dust seal ring in the housing.
(32) Fit the dust seal ring in the housing using
special tool and a plastic hammer.
(33) Press the plastic plugs into the connection
ports.
※
Do not use a hammer!
(22.4±4.3 lbf·ft)
5-44
(780-3A) 5-84(3)
(780-3A) 5-84(4)
(780-3A) 5-85(1)
(780-3A) 5-85(2)