Hyundai HL955 Manual page 209

⑦
Preload cup spring package by means of
assembly aid (S1) and pressure piece
(S2), until L-ring has engaged into the
annular groove.
Assembly aid (S1)
Assembly fixture (S＋S2) 5870 345 124
(Inner installer and pressure piece)
※
It is always necessary to mount a new
L-ring.
Disk carrier with piston retraction :
1 Cup spring package
2 L-ring
3 Disk carrier
4 Piston with O-rings
⑧
Install outer and inner disks alternately
into the disk carrier (4) as personated in
figure TM230.
1 Friction disk-coated on one side
2 Outer disks
3 Inner disks
※
Take care that the uncoated (blank) side
of the friction disk (1) is showing towards
the piston.
Number of friction surfaces : 14
⑨
Mount end plate (1) and fix disk package
by means of snap ring (2) (e.g. thickness
= 2.65 mm / recommended value).
5870 345 088
(1 pcs)
(7 pcs)
(7 pcs)
3-153
S2
1 2
3
4
3
4
1
S1
7609ATM228
7609ATM229
2
1
7609ATM230
2
7609ATM231