Hyundai HL955 Manual page 225

※
Check closing and opening of the clutch
by means of compressed air at the hole
(see arrow).
Closing and opening of the clutch must
be clearly audible.
(7) (7) Input shaft Input shaft
①
Undercool input shaft (1) (approx. -80˚C),
heat up drive gear (2) (approx. +120˚C)
and mount until contact is obtained.
※
Wear protective gloves.
②
Secure drive gear by means of retaining
ring 100×3 (1).
③
Heat up bearing inner ring (approx.
120˚ C)
1
3-169
7609ATM291
2
7609ATM292
1
7609ATM293
7609ATM294