④
Place piston (1) into the disk carrier.
※
Observe installation position, see figure.
⑤
Use a hand-operated press to place
piston into the disk carrier by means of
the assembly aid.
Assembly aid
⑥
Mount inner installer (S) onto the disk
carrier.
Install cup spring package (1) and L-ring
(2).
※
Installation position cup spring package
and L-ring see figure TM252.
Inner installer
⑦
Preload cup spring package by means of
assembly aid (S1) and pressure piece
(S2), until L-ring has engaged into the
annular groove.
Assembly aid (S1)
Assembly fixture (S+S2) 5870 345 124
(Inner installer and pressure piece)
※
It is always necessary to mount a new
L-ring.
5870 345 088
see TM251
5870 345 088
3-158
2
1
S2
S1
1
7609ATM248
7609ATM249
S
7609ATM250
7609ATM251