Hyundai HL955 Manual page 218

18 Mount axial washer 55×78×1 (1), axial
cage 55×78×3 (2) and running disk 55
×78×5 (3) and oil it.
※
Install chamfer (see arrow) of running
disk (3) showing towards the axial cage.
※
Pay attention that the running disk is
flush with the shaft (see arrow) collar to
ensure that all inner disks are mounted
on the idler gear teeth.
19 Heat up bearing inner ring (approx.
120˚C).
20 Mount bearing inner ring (1) until contact
is obtained.
Fit rectangular ring 40×2.5 (2).
※
Wear protective gloves.
※
Adjust bearing inner ring after cooling-
down.
2
2
3-162
3
1
7609ATM263
7609ATM264
7609ATM265
1
7609ATM266