Hyundai HL955 Manual page 302

⑭
Press stop bolt into the planetary carrier
until contact is obtained.
1 Stop bolt
2 Planetary carrier
⑮
Insert the cylindrical roller bearing into
the planetary gear – for this purpose
press the cylindrical roller bearing
through the packaging sleeve until the
snap ring engages into the annular
groove of the planetary gear.
※
Use packaging sleeve to facilitate
assembly.
1 Cylindrical roller bearing
2 Packaging sleeve
3 Snap ring
4 Planetary gear
16
Heat bearing inner rings and insert the
premounted planetary gears with large
radius facing the planetary carrier
(downwards) until contact is obtained.
※
Adjust bearing inner rings after cooling
down.
Then fix planetary gears by means of
retaining rings.
17
Heat tapered roller bearing and install it
to the planetary carrier until contact is
obtained.
3-246
7609AAX158
1
2
3
4
7609AAX159
7609AAX160
7609AAX161