Hyundai HL955 Manual page 201

21 Mount stud bolt (1).
·Tightening torque (M10/8.8×16) :
1.73 kgf·m (12.5 lbf·ft)
Fit rectangular ring 40×2.5 (2).
※
Check closing and opening of the clutch
by means of compressed air at the hole
(see arrow).
Closing and opening of the clutch must
be clearly audible.
22 Install sealing cap -orifice- (1).
※
Wet contact surface with loctite (Type No.
262).
(3) (3) Clutch K1 Clutch K1
①
Heat up bearing inner ring (approx.
120˚C)
1
3-145
2
7609ATM196
7609ATM197
1
7609ATM198
7609ATM199