※
The figure left shows the installation
position of the individual clutches in the
housing rear part one more time.
(13)
Fix clutches K1, K2, K3 and K4 by using a
handle.
Handle
※
Clutches KV, KR and input shaft (2) are
only fixed by the gear chain.
Check all rectangular rings, grease and
align them centrically.
(14)
Pivot housing rear part 180˚ by using a
lifting device.
1
Clutch KV
2
Input shaft
3
Clutch KR
4
Pump shaft
※
Clutch KV, KR and input shaft are only
fixed by the gear chain.
Attention must be paid that the non-fixed
components of the gear chain do not get
loose.
(15)
Use the lifting device to bring the housing
rear part into contact position with the
h o u s i n g f r o n t p a r t , by c a u t i o u s l y
assembling the clutches.
Then remove handles.
(16)
Remove housing rear part again.
5870 260 010
3-177
KV
AN
KR
K4
K1
S
1
2
K2
K3
7609ATM320
3
4
7609ATM321
7609ATM322
7609ATM323