Section 4 Brake System - Hyundai HL955 Manual

⑤
Fix parking brake (1) on transmission
housing using the hexagon screw - guide
pin (2).
·Tightening torque (M20×1.5) :
4.69 kgf·m (33.9 lbf·ft)
⑥
Fix hexagon nut on brake caliper using
the open end wrench insert.
·Tightening torque (M20×1.5) :
23.5 kgf·m (170 lbf·ft)
⑦
Insert setting gauge on both sides
between base disk and brake disk and
hold in its position.
※
All installation, fitting and maintenance
instructions, functional characteristics
and setting specifications for the parking
brake see page 4-22, "PARKING
BRAKE SYSTEM".
Clearance : 0.5 - 1.5 mm
Nom. clearance : 1.0 mm
(3) (3) Output flange on converter side Output flange on converter side
①
Use driver (S) to mount shaft seal
90×120×13, with the sealing lip
showing to the oil sump.
Driver
※
Use of the specified driver (S) ensures
the exact installation position.
※
Fill space between sealing lip and dust
lip with grease.
※
Installation position shaft seal see figure
TM344.
5870 048 237
3-183
2
1
S
7609ATM340
7609ATM341
7609ATM342
7609ATM343