Hyundai HL955 Manual page 281

Reassembly conventional differential Reassembly conventional differential
(standard)
①
Mount two locating pins and press the
heated crown wheel onto the differential
housing until contact is obtained.
Locating pins
②
Insert thrust washer into the differential
housing.
③
Insert axle bevel gear.
④
Insert spider gears with thrust washers
into the differential housing and fix them
with the spider shaft (long).
※
Thrust washers must be positioned with
the tabs (see arrow) being located in the
recesses of the differential housing.
5870 204 040
3-225
7609AAX086
7609AAX087
7609AAX088
7609AAX089