Hyundai HL955 Manual page 443

(11) Hold the outer part of the assembly tool in
the bottom of the steering unit housing
and guide the inner part of the tool right to
the bottom.
(12) Press and turn the O-ring into position in
the housing.
(13) Draw the inner and outer parts of the
assembly tool out of the steering unit
bore, leaving the guide from the inner part
in the bore.
Installation instructions for lip seal Installation instructions for lip seal
(14) Lubricate the lip seal with hydraulic oil and
place it on the assembly tool.
5-39
(780-3A) 5-79(3)
(780-3A) 5-79(4)
(780-3A) 5-80(1)
(780-3A) 5-80(2)