Hyundai HL955 Manual page 165

(12) Lift the clutches out of the housing in
numerical order as described in the
legend.
1 K1 clutch
2 K2 clutch
3 K3 clutch
4 K4 clutch
5 KR clutch
6 KV clutch
7 input shaft
(13) Remove bearing outer rings (arrows)
from the housing rear part.
※
If, contrary to the recommendation, the
tapered roller bearings of clutches, input
and output are not replaced, it is
imperative to ensure the previous pairing
(bearing outer ring/ bearing inner ring).
Bearing outer ring and bearing inner ring
must be marked.
※
The lubrication lines are rolled in (1 and
2) and are highly difficult to remove.
In case of damage, use of the appropriate
special tool is imperative for fitting or
replacing these components.
5
4
1
3-109
7
6
2
3
1
7609ATM057
7609ATM058
2
7609ATM059