⑨
Mount two adjusting screws and insert
the housing cover until contact with the
differential housing is obtained.
Locating pins
Preload the differential by means of the
press and bolt with new locking screws.
·Tightening torque (M16/12.9) :
40.8 kgf·m (295 lbf·ft)
⑩
Install compression spring onto the
sliding sleeve.
⑪
Insert the premounted sliding sleeve into
the housing cover.
Preload the compression spring by
means of the press and engage the
retaining ring into the annular groove of
the sliding sleeve.
Setting of disk package
Setting of disk package
⑫
Premount single parts according to the
adjacent sketch.
1
Housing cover
2
Pressure piece
3
Cage
4
Lever (12EA)
5
Disk carrier
6
Pressure ring
7
Inner disks
8
Outer disks (optional)
9
Snap ring
※
For the number of disks and the disk
arrangement please refer to the relating
parts manual.
5870 204 040
3-222
7609AAX075
7609AAX076
7609AAX077
7609AAX078