Hyundai HL955 Manual page 247

13) 13) REASSEMBLY REASSEMBLY
Inductive sensor, Hall sensor, breather, Inductive sensor, Hall sensor, breather,
oil filler and oil drain plug oil filler and oil drain plug
(1)
Mount inductive sensors (1, 2 and 3) with
O-rings 15×2.
1 Inductive sensor - turbine speed
2 Inductive sensor - speed/central gear
3 Inductive sensor - engine speed
·Tightening torque :
3.06 kgf·m (22.1 lbf·ft)
Mount breather (4).
·Tightening torque :
1.22 kgf·m (8.85 lbf·ft)
Mount speed sensor (5) with O-ring 15.54
×2.62 and fix it by means of cylindrical
screw (6).
1 speed sensor (hall sensor) -
·Tightening torque (M8/8.8×16) :
2.35 kgf·m (17.0 lbf·ft)
Mount screw plug M26×1.5 (7) with
O-ring 23×2.
·Tightening torque (M8/8.8×16) :
8.16 kgf·m (59.0 lbf·ft)
Bring cover (8) with seal into contact
position with the housing front part and fix
it by means of hexagon screws (9).
·Tightening torque (M8/8.8×18) :
2.35 kgf·m (17.0 lbf·ft)
(2) Mount oil drain plug with O-ring 35×2 (1).
·Tightening torque (M38×1.5) :
8.16 kgf·m (59.0 lbf·ft)
Bring oil level tube (2) with seal into
contact position with the housing front part
and fix it by means of hexagon screws (3).
·Tightening torque (M8/8.8×50) :
3.47 kgf·m (25.1 lbf·ft)
Fasten dipstick (4) in oil level tube.
Fix identification plate (5) to the housing
front part.
※
Use loctite (type No. MS 9360).
chain
output speed
3-191
2 3
1
6
5
9
4
2
3
4
7
8
7609ATM366
5
1
7609ATM367