Hyundai HL955 Manual page 163

(5) Use lifting device to bring housing rear
part (1) into contact position with housing
front part (2) again.
※
Due to the installation conditions, the
removal of single clutches without using
the special tool is not possible.
(6) Fix all clutches K1, K2, K3 and K4 by
means of handle (1).
Handle
※
Clutches KV, KR and input shaft (2) are
only fixed by the gear chain.
(7) Separate housing rear part incl. clutches
from housing front part by means of the
lifting device and attaches it to the
assembly truck.
1 Clutch KV
2 Input shaft
3 Clutch KR
4 Pump shaft
※
Clutches KV, KR and input shaft are only
fixed by the gear chain.
Attention must be paid that the non-fixed
components of the gear chain do not get
loose.
(8) Loosen cylindrical screws of oil tubes (1)
in the housing front part and remove
them.
5870 260 010
3-107
1
2
1
2
4
1
1
2
7609ATM049
7609ATM050
3
7609ATM051
1
7609ATM052