Hyundai HL955 Manual page 208

③
Place both O-rings (1 and 2) into the
piston grooves and oil them.
1 75×3
2 142×3
※
Check function of the drain valve (see
arrow) - There must be no jamming of
the ball.
④
Place piston (1) into the disk carrier.
※
Observe installation position, see figure.
⑤
Use a hand-operated press to place
piston into the disk carrier by means of
the assembly aid.
Assembly aid
⑥
Mount inner installer (S) onto the disk
carrier.
Install cup spring package (1) and L-ring
(2).
※
Installation position cup spring package
and L-ring see figure TM229.
Inner installer
5870 345 088
see figure TM228
3-152
2
1
1
2
7609ATM224
1
7609ATM225
7609ATM226
S
7609ATM227