Hyundai HL955 Manual page 238

②
Press screen sheet (1) onto the input
flange (2).
Mount output flange (2) until contact is
obtained.
③
Insert O-ring 48×4 into the space
between output flange and shaft.
※
Fix output flange (1) by means of washer
(2) and hexagon screws.
Oil hexagon screws before the assembly.
·Tightening torque (M10/8.8×30) :
4.69 kgf·m (33.9 lbf·ft)
※
It is always necessary to use new
hexagon screws.
Mount cylindrical screw with washer (3)
for stop of the parking brake setting
screw.
·Tightening torque (M10/8.8×16) :
4.89 kgf·m (35.4 lbf·ft)
④
Fix brake disk (1) at output flange by
means of hexagon screws (2) and
washers.
·Tightening torque (M10/10.9 × 25) :
6.93 kgf·m (50.2 lbf·ft)
Connect HP pump on port (see arrow)
and apply approx. 80 bar pressure to
parking brake (3) and bring it in contact
position.
HP hand-operated pump 5870 287 007
MINIMESS coupling 5870 950 101
3-182
2
1 2
2
1
3
1
7609ATM337
3
7609ATM338
7609ATM339