22
Remount differential - by mounting stub
shaft into gearing of axle bevel gear
(differential).
※
Special tool
Lifting bracket
23
Position axial roller ring on differential
and fix by means of grease (assembly
aid).
24
Oil O-ring (arrow) and mount it.
Position complete axle half on the axle
drive housing-by mounting the stub shaft
into the gearing of the axle bevel gear
(differential).
※
Pay attention to radial installation position
of output towards axle drive housing!
※
Special tool
Lifting chain
Eyebolts
25
Fix axle housing finally by means of hex
screws.
Rotate differential several times in both
directions - roller setting.
·Tightening torque (M 18/10.9) :
39.8 kgf·m (288 lbf·ft)
5870 281 033
5870 281 047
5870 204 071
3-284
7577AAXR103
7577AAXR104
7577AAXR105
7577AAXR098