(3) (3)
Engine connection (direct mount)
Engine connection (direct mount)
①
Position converter (1) by means of lifting
device until contact is obtained.
②
Position 1 washer/each / thickness =
1.0 mm (4 EA ) (1) onto the flex plate
mounting webs (4 EA ).
Place flex plates (2, 3 and 4).
※
Pay attention to the installation position.
·
Spot-welded reinforcing rings with
thread of the flex plate (2) to be
arranged towards the outside - see
arrows.
·
Spot-welded reinforcing disks of the
flex plate (3) to be arranged towards
the outside - see arrows.
Mount washer (5) onto the hexagon
screw M12×18 (6) and fix flex plate.
※
Wet threads of hexagon screws with
loctite (type No. 262).
③
Fix flex plate (1) by means of hexagon
screws (2).
※
Secure hexagon screws with loctite (type
No. 262).
·Tightening torque (M12/10.9×18) :
11.7 kgf·m (84.8 lbf·ft)
4
2
1
3-189
1
7609ATM361
6
5
3
1
7609ATM362
2
7609ATM363