Disk carrier with piston retraction :
1
Cup spring package
2
L-ring
3
Disk carrier
4
Piston with O-rings
※
Different clutches (disc arrangements
with relevant disc clearance) can be
installed, depending on the par ts
manual.
※
The actually installed clutch and disc
arrangement must be taken from the
corresponding parts manual.
※
Figure no. : TM253 and TM254 illustrates
the different disc arrangements.
⑧
Install outer and inner disks alternately
into the disk carrier (4) as personated in
figure TM253.
1
Friction disk-coated on one side
2
Outer disks
3
Inner disks
※
Take care that the uncoated (blank) side
of the friction disk (1) is showing towards
the piston.
Number of friction surfaces : 14
⑨
Install outer and inner disks alternately
into the disk carrier (4) as personated in
figure TM254.
1
Friction disk-coated on one side
2
Outer disks
3
Inner disks
Take care that the uncoated (blank) side
of the friction disk (1) is showing towards
the piston.
Number of friction surfaces : 12
3
4
(1 pcs)
(7 pcs)
(7 pcs)
4
(1 pcs)
(7 pcs)
(7 pcs)
4
3-159
1
2
3
3
7609ATM252
2
1
7609ATM253
2
1
7609ATM254