Hyundai HL955 Manual page 437

(5) Remove distributor plate.
(6) Screw out the threaded bush over the
check valve.
(7) Remove O-ring.
(8) Take care to keep the cross pin in the
sleeve and spool horizontal. The pin can
be seen through the open end of the
spool. Press the spool inwards and the
sleeve, ring, bearing races and needle
bearing will be pushed out of the housing
together.
5-33
(780-3A) 5-73(1)
(780-3A) 5-73(2)
(780-3A) 5-73(3)
(780-3A) 5-73(4)