System Configuration Data File Operations; Target Category Menus; Loading A File - Sony MLS-X1 User Manual

For details, see "To select a region" (page 340).
Note
Selection of a region is not required in the shotbox,
macro, and macro attachment categories.
3
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
4
Select a package and press [OK].
To select the default package
Press the [Default Package] button.
5
In the [Package] group list, select the target file to
rename.
To select and rename multiple files, place a check
mark beside the target files to rename.
To select and rename all files, place a check mark in
the Select All checkbox.
You can also press the [Select File(s)] button and
enter a file number in the numeric keypad window.
Notes
• Selection of a file is not required in the macro
attachment category as there is only one file.
Pressing the [Search] button searches for the file
name and displays only the corresponding files.
• Searching is not available for key snapshots, wipe
snapshots, DME wipe snapshots, and macro
attachment categories.
6
Press the [Rename] button.
The [Rename] window appears.
7
Press the input field and enter a file name (up to 8
characters) using the keyboard.
8
Press [OK].
The file is renamed.
System Configuration
Data File Operations

Target Category Menus

System configuration data file operations are performed
using the Home > File > System Config menu.
The following submenus are used for each category.
Categories
System
configuration
User accounts
This section describes the system configuration data
menu as an example.

Loading a File

Note
Files in categories where loading is locked cannot be
loaded.
1
Open the Home > File > System Config > Config >
Load menu (10106.11).
The name of the most recently loaded package and
the free space in storage are displayed at the top right.
2
Press the [Select] button in the [Package] group.
The [Select Package] window appears.
3
Select a package that includes the target file to load
and press [OK].
To select the default package
Press the [Default Package] button.
4
Press the [Load] button.
5
Check the message, then press [OK].
The file is loaded.
343
Level 4 > level 5 Menu
number
Config > Load 10106.11
Config > Save 10106.12
Config > Copy 10106.13
Config > Browse Files 10106.14
User Account > Load 10106.21
User Account > Save 10106.22
User Account > Copy 10106.23
10106.24
User Account > Browse
Files