Preliminary Steps; Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

14.4.3.1 Preliminary steps

"Locating the defective server" on page 50
Ê
"Suspending BitLocker functionality" on page 71
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Removing the defective system board" on page 305
Ê

14.4.3.2 Removing the defective TPM

Ê Remove the TPM as described in section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

14.4.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the TPM as described in section

14.4.3.4 Concluding steps

Ê Reinstall the system board as described in section
system board" on page
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 95
Ê
I
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
RX1330 M3
307.
Upgrade and Maintenance Manual
System board and components
"Removing the TPM" on page
"Installing the TPM" on page
"Installing the new
288.
286.
293