Replacing The Ultraslim Odd - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

12.6.3 Replacing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH0 / (+) No. 0 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
12.6.3.1 Preliminary steps
"Locating the defective server" on page 49
Ê
"Removing backup and optical disk media" on page 108
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
I
Removing the front cover is not required in order to replace the
ultraslim ODD.
"Removing the system air duct" on page 67
Ê
Ê If applicable, "Removing the riser module" on page 84
Ê If applicable, remove the expansion card, see section
expansion card" on page
Ê Remove the fan bridge, see section
Ê If applicable, "Removing the 4x 3.5-inch HDD extension box" on page 255
12.6.3.2 Removing the defective ultraslim ODD
Ê Remove the ultraslim ODD adapter, see section
drive" on page
Ê Remove the ultraslim ODD, see section
the ultraslim ODD adapter" on page
TX2550 M4
318.
386.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Handling fan bridges" on page
"Removing an accessible
"Removing the ultraslim ODD from
401.
Accessible drives
"Removing an
90.
403