Accessible drives
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
13.3.4
Replacing the ODD (2.5-inch chassis)
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Torx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the defective ODD
▶ Remove the ODD, see
page
390.
394
60.
65.
69.
52.
"Removing the ODD (2.5-inch chassis)" on
Upgrade and Maintenance Manual
105.
Hardware: 5 minutes
49.
90.
87.
53.
56.
69.
52.
RX2540 M6